Have to brace up the front in order to apply pressure to the Styrofoam and plywood when we glue them up. 
I'm using a 2' x 8' piece of 3/4" plywood. Attached to the plywood is a 2"x6" to provide a backbone to prevent the plywood from bowing. This is being held up by 2"x4" 's that are cut a little long and then wedged into place against the ground and the plywood.
At this time the "floor" of the bunk has been completed and we will start on the roof on Monday. Weather permitting.
Sunday, March 8, 2009
